Top Deals
View all
The Front Camera kit (New Revision) is designed for switching between the front and the backup cameras. Multiple options are ...
£159.00(Inc VAT at 20%)Plug-n-Play kit for easy installation of 3rd Brake Flasher. No tools required for installation. This device has integrated accele...
£49.00(Inc VAT at 20%)4 partitions made from black 1/4″ MDF and 4 3D printed plastic caps. Available for 2016+ (ND) and for 2006-2015 (NC)
£70.00(Inc VAT at 20%)Stainless Steel torsion springs with mounting hardware. Latest revision. Installation instruction (coming soon) WARNING: this ki...
£99.00(Inc VAT at 20%)OBO 2 T-Valve Accessory. Suitable for rim valve hole of diameter 8.3 mm to 11.3mm. This requires installation at a tire shop. Refe...
£0.00(Inc VAT at 20%)Available options:Acrylic Wind Blocker with logo options - Fiat WBRC £100 Clear - no logo Size ...
£120.00(Inc VAT at 20%)This device will keep ACC power (accessory power) enabled until driver side door is opened or for 10 minutes after engine was...
£89.00(Inc VAT at 20%)High Power Red LED strip (120 LEDs/m) with 3M VHB backing tape. Strip comes with 5' cable and connector to plug into rear harness ...
£69.00(Inc VAT at 20%)This harness is designed to provide an easy access to the parking light wires for the additional LED strip or Wind Blocker illumin...
£26.95(Inc VAT at 20%)Micro-controller for window switch to enable auto roll-up/down feature, for DIY installation. Soldering required.
£50.00(Inc VAT at 20%)3" wire harness, for plug-n-play installation of ballast resistors for LED conversion; allows you to keep factory wires intact. O...
£12.00(Inc VAT at 20%)This is the illumination kit for the acrylic wind blockers (4.5mm acrylic). LED enclosure 3D printed from black ABS.Brightness con...
£50.00(Inc VAT at 20%)Central Console Shelf is made from black Delrin 2.3mm thick plastic, covered with black felt (optional). Central Console Shelf wi...
£29.95(Inc VAT at 20%)Rear Turn Signal sequential LED lights with high power OSRAM LEDs. Manufactured in USA. Direct replacement of the WY21W bulb. Two...
£165.00(Inc VAT at 20%)3D printed assembly for phone holder with magnets or clip, base only, without phone holder. This base can be plugged into the exi...
£50.00(Inc VAT at 20%)Made from two color, black on white 1.5mm acrylic with 3D printed frame. To install this plate, all you need to do is remove orig...
£34.96(Inc VAT at 20%)This is the add-on OBD-II device. It will produce warning sounds through an Instrument Cluster buzzer, if the turn signal is left ...
£79.00(Inc VAT at 20%)This harness will enable LED DRL when headlights are on. Note: this product is designed to work only with LED DRL option (MX-5 GT...
£49.00(Inc VAT at 20%)
Best Sellers
View all
The Front Camera kit (New Revision) is designed for switching between the front and the backup cameras. Multiple options are ...
£159.00(Inc VAT at 20%)Plug-n-Play kit for easy installation of 3rd Brake Flasher. No tools required for installation. This device has integrated accele...
£49.00(Inc VAT at 20%)4 partitions made from black 1/4″ MDF and 4 3D printed plastic caps. Available for 2016+ (ND) and for 2006-2015 (NC)
£70.00(Inc VAT at 20%)Stainless Steel torsion springs with mounting hardware. Latest revision. Installation instruction (coming soon) WARNING: this ki...
£99.00(Inc VAT at 20%)Place your order now to secure your new Mk11 Zero 10 with 1kW Motor NOWThe ZERO 10 is a full-sized workhorse of an electric scoote...
£0.00(Inc VAT at 20%)Zero 9 Electric Scooter48v 600W power gives the Zero 9 a higher top speed and its larger pneumatic rear tire and wider deck give a...
£0.00(Inc VAT at 20%)X – is for extreme. Dual 1000wt hub motors (peak 3600wt) and off-road spec suspension bring a new sphere of performance to&n...
£0.00(Inc VAT at 20%)OBO 2 T-Valve Accessory. Suitable for rim valve hole of diameter 8.3 mm to 11.3mm. This requires installation at a tire shop. Refe...
£0.00(Inc VAT at 20%)Available options:Acrylic Wind Blocker with logo options - Fiat WBRC £100 Clear - no logo Size ...
£120.00(Inc VAT at 20%)This device will keep ACC power (accessory power) enabled until driver side door is opened or for 10 minutes after engine was...
£89.00(Inc VAT at 20%)High Power Red LED strip (120 LEDs/m) with 3M VHB backing tape. Strip comes with 5' cable and connector to plug into rear harness ...
£69.00(Inc VAT at 20%)This harness is designed to provide an easy access to the parking light wires for the additional LED strip or Wind Blocker illumin...
£26.95(Inc VAT at 20%)Micro-controller for window switch to enable auto roll-up/down feature, for DIY installation. Soldering required.
£50.00(Inc VAT at 20%)3" wire harness, for plug-n-play installation of ballast resistors for LED conversion; allows you to keep factory wires intact. O...
£12.00(Inc VAT at 20%)This is the illumination kit for the acrylic wind blockers (4.5mm acrylic). LED enclosure 3D printed from black ABS.Brightness con...
£50.00(Inc VAT at 20%)Central Console Shelf is made from black Delrin 2.3mm thick plastic, covered with black felt (optional). Central Console Shelf wi...
£29.95(Inc VAT at 20%)Rear Turn Signal sequential LED lights with high power OSRAM LEDs. Manufactured in USA. Direct replacement of the WY21W bulb. Two...
£165.00(Inc VAT at 20%)3D printed assembly for phone holder with magnets or clip, base only, without phone holder. This base can be plugged into the exi...
£50.00(Inc VAT at 20%)Made from two color, black on white 1.5mm acrylic with 3D printed frame. To install this plate, all you need to do is remove orig...
£34.96(Inc VAT at 20%)This is the add-on OBD-II device. It will produce warning sounds through an Instrument Cluster buzzer, if the turn signal is left ...
£79.00(Inc VAT at 20%)This harness will enable LED DRL when headlights are on. Note: this product is designed to work only with LED DRL option (MX-5 GT...
£49.00(Inc VAT at 20%)
Latest Arrivals
The Front Camera kit (New Revision) is designed for switching between the front and the backup cameras. Multiple options are ...
£159.00(Inc VAT at 20%)Available options:Acrylic Wind Blocker with logo options - Fiat WBRC £100 Clear - no logo Size ...
£120.00(Inc VAT at 20%)This is the illumination kit for the acrylic wind blockers (4.5mm acrylic). LED enclosure 3D printed from black ABS.Brightness con...
£50.00(Inc VAT at 20%)This harness will enable LED DRL when headlights are on. Note: this product is designed to work only with LED DRL option (MX-5 GT...
£49.00(Inc VAT at 20%)


